PUSH PULL ROD/CABLE RODS is one of the most versatile, useful but simple tools we have come across in a long time. A series of rods, much like tent poles, in a variety of thicknesses and flexibilities, screw together and using a series of attachments can pull cabling through the tightest of spaces such as ducting during installs and building refits.It push and pull power are more 50KG .
Application:

1. Stiff enough for drop ceilings and flexible enough for insulated walls. Heavy duty rods for tough pulls.
2. A simple and inexpensive hand tool used by electrical, aerial and data cable installers to lay
3. cables over ceilings, under floors, through walls, crawl spaces and conduit..
4. Route and retrieve cable, Mega Cable Rod Set
5. Good for reasonable length runs with tight corners

Size: OD4MM? AND OD5MM, COLOR :yellow,red,grey,green,black etcs. LONG:1M
Accessories:
1.Flexi Lead - made from a flexible ‘spring-back’ material. They are very short leader pieces to help a single rod or rod train around tight corners.
2.Tuff Hook - A beefy hook for grabbing cable or flexible conduit to manoeuver or remove it.
3.Mini Eye and Ring - A simple method of attaching a small cable onto a rod end to allow it to be pushed or pulled into place.
4.Gender Changer - Most attachments are male threaded so a gender changer is useful to join male to male.
5.Domed Bullet - The rounded nose glances off obstructions or pushes through congested areas without snagging or causing damage.
6.Flat Bullet - Acts as a 'snow plough' helping to push rods through gritty, dirty places.
Single Magnet - Capable of lifting over 1kg.
7.Super Beam - Torch with a powerful white LED beam that automatically lights up when you screw it onto a rod.
8. Cable Grips - Self-tightening mesh grips that are attached to rods to pull cables.
9.Chain & Magnet - This can be attached to one rod, for example, in a void, then a magnet fitted on another rod. The magnet will ‘find’ the chain and pull it to the cable run exit.
?WE HAVE THREE TYPE GRADES ,WE CAN MAKE VARIOUS PACKING ACCORDING TO THE COLOR,LONG,QUANTITY ETCS OF THE ORDER.

r

Fibersnake ?duct ?rodder
Structure :? ?
System is built to handle the rugged daily use of utility and electrical construction. The core is a non-conductive solid fiberglass rod with the push, pull, and bending strength to do the job it's required to do, and do it well. The high-visibility orange outer sheath has a ABS polymer coating that protects the rod surface from abrasion and provides a self-lubricating outer surface. And comes in a cage with a hand operated brake.
Application: System can handle virtually any job, from installing short run electrical wire and data cable to running long distances of fiber optic, copper and coax cable. These rodders and fish tapes combine to offer a system (your buddies) to meet all your pulling and fishing requirements.